M-90 E4043
Features
- Good stable arc
- Operates at low temperatures
- Low spatter and fume
Application
- General Purpose Aluminum
- Good at heat treatment Aluminum parts
- Can be use in brazing
Classification
AWS / ASME SFA5.3 E4043
Chemical Compositions
| Al | Si | Fe | Cu | S | CR | Ni | MO |
| BAL. | 4.5-6.0 | 0.6 | 0.2 | - | - | - | - |
Mechanical Properties
| T.S | Cold corner piece |
| MPa | (d-2t) |
| 130 | 150 |
Welding Parameters
| DIAMETER (mm) | 1.6 | 3.2 | - |
| LENGTH (mm) | - | 350 | - |
| CURRENT (amps) | - | 70-100 | - |
M-90 E5356
Features
- Best for color matching after anodizing
- With magnesium
- Operates at low temperatures
- Low spatter and fume
Application
- General Purpose Aluminum
- Good at heat treatment Aluminum parts
- Can be use in brazing
Classification
AWS / ASME SFA5.3 E5356
Chemical Compositions
| Y.S | T.S | EL | |
| MPa | MPa | (%) | |
| 117 | 268 | 17 | 0 (32) |
Mechanical Properties
| Al | Si | Fe | Cu | Mg | CR | Ni | MO |
| BAL. | 0.15 | 0.6 | 0.04 | 4.5-5.5 | - | - | - |
Welding Parameters
| DIAMETER (mm) | 1.6 | 3.2 | - |
| LENGTH (mm) | - | 350 | - |
| CURRENT (amps) | - | 70-100 | - |
M-90 E1100
Features
- Pure aluminum
- Salt type coating
- Fast short arc welding
Application
- Welding of pure aluminum
- Corrosion resistance
- Have good strength
Classification
AWS / ASME SFA5.3 E1100
Chemical Compositions
| Al | Si | Fe | Cu | Mg | CR | Ni | MO |
| 99 | 4.5-6.0 | 0.6 | 0.2 | 4.5-5.5 | - | - | - |
Mechanical Properties
| T.S | Y.S |
| MPa | MPa |
| 70 | 55 |
Welding Parameters
| DIAMETER (mm) | 1.6 | 3.2 | - |
| LENGTH (mm) | - | 350 | - |
| CURRENT (amps) | - | 70-100 | - |
M-90 ER4043
Features
- Good fluidity and less crack sensitivity
- Good corrosion resistance typically used as filler material for welding of aluminum parts
Application
- Welding filler wire
- Spray and flame metallizing wire
Classification
A5.10/ASME SFA A5.10 ER4043
Chemical Compositions
| Al | Be | Mn | Cu | Mg | Si | Zn | Ti |
| Remainder | 0.0008 | 0.05 | 0.30 | 0.05 | 5.0 | 0.10 | 0.15 |
Mechanical Properties
| T.S | Y.S |
| MPa | MPa |
| 195 | 170 |
Welding Parameters
| DIAMETER (mm) | 1.6 | 2.4 | 3.2 |
| LENGTH (mm) | 1000 | 1000 | 1000 |
| CURRENT (amps) | 50-70 | 70-100 | 100-150 |
Welding Positions
M-90 ER5356
Features
- Good fluidity and less crack sensitivity
- Good corrosion resistance typically used as filler material for welding of aluminum parts
Application
- Welding filler wire
- Spray and flame metallizing wire
Classification
A5.10/ASME SFA A5.10ER5356
Chemical Compositions
| Al | Be | Mn | Cu | Mg | Si | Zn | Cr |
| Remainder | 0.0008 | 0.05 | 0.10 | 0.05 | 0.25 | 0.10 | 0.15 |
Mechanical Properties
| T.S | Y.S |
| MPa | MPa |
| 290 | 198 |
Welding Parameters
| DIAMETER (mm) | 1.6 | 2.4 | 3.2 |
| LENGTH (mm) | 1000 | 1000 | 1000 |
| CURRENT (amps) | 50-70 | 70-100 | 100-150 |
